At 07:10 PM 8/30/99 -0400, Dick Rasmussen wrote:
>I also use two big rubber bands in an
>X pattern under the flip cover and around the back of the palm and the
>leather case to keep the hot sync cable attached to the Palm since it
>"wants" to fall out and even slight movement causes it to lose connection.
FWIW, since the only thing that I use my Palm for is to collect
G-cube data, I've used a big piece of racer's tape to keep the
cable from losing its connection. Its working pretty well so far.
John Lye
rjl6n@Virginia.edu
|