I put the fuse between the headlight switch and the two red wires
which feed the tail lights, front parking lights and the
dashboard lights.
HTH,
Peter Schauss
1980 MGB
1963 BJ7
-----Original Message-----
From: owner-healeys@autox.team.net
[mailto:owner-healeys@autox.team.net]On Behalf Of John Peak
Sent: Sunday, April 04, 2004 7:37 PM
To: healeys@autox.team.net
Subject: Re: BJ 8 Set-backs - brakes..wiring ... trans conversion
--- Jerry Wall <jwbn6@iopener.net> wrote:
> on your new harness install in line fuse to protect
> tail lamps and license plate light where the "smoke"
> will stay in the boot.
List,
I would like to do this to my car while I am thinking
about it. Specifically where is the fuse installed
and what size fuse should I use? I know this has been
covered before, but I would rather spend my time
making the repair than searching the archives in a
potentially fuitless attempt to get the information.
Many Thanks,
John
'59 BN7
|