healeys
[Top] [All Lists]

RE: the flasher unit

To: "'Dr. Carl Rubino'" <ruvino@ripnet.com>,
Subject: RE: the flasher unit
From: "Michael Salter" <msalter@precisionsportscar.com>
Date: Tue, 11 May 2004 09:02:19 -0400
Hi Carl,
Because the flasher unit and the power to the turn signal switch both
come from the "ignition on" fuse I would bet that you have a little
corrosion on the fuse holder.

Michael Salter
www.precisionsportscar.com
 
 

-----Original Message-----
From: owner-healeys@autox.team.net [mailto:owner-healeys@autox.team.net]
On Behalf Of Dr. Carl Rubino
Sent: Tuesday, May 11, 2004 8:00 AM
To: healeylist
Subject: the flasher unit

When I took the car out of storage the turn signals wouldn't work. So I
got
out my BMC workshop manual and proceeded to test the following:
bulbs are OK
no power to terminal B so I hooked one up temporarily while proceeding
with
testing
connected terminals B and L-no lights so flasher unit is OK
checked brake switch overriding relay-connected 2 and 3 and I and left
lamps
flashed-connected 6 and 7 and I and right lamps flashed

So as far as I can tell everything is OK so why are they not working?

Carl
BN-4(L)





<Prev in Thread] Current Thread [Next in Thread>