I usually make alot of the sheetmetal parts that I need if I have patterns but
I'm glad I purchased these items from Kilmartin. And I'm glad you asked some
questions I hadn't got around to yet.
--
Tim Davis BN7
> Thanks to John Snyder and Eric (Rick)Wilkins for getting answers to my BN7
> questions.
> The "cups" are readily available from Kilmartin under their numbers AH289L
> and AH289R. These are the steel parts only and the wood needs to be made up
> to fit within.
> Rich Chrysler
> ----- Original Message -----
> From: "John Snyder" <helyjohn@cablespeed.com>
> To: "Rich C" <richchrysler@quickclic.net>; "Healeys"
> <healeys@autox.team.net>
> Sent: Saturday, July 17, 2004 9:51 PM
> Subject: Re: BN7 Help Needed
>
>
> > Hi Rich,
> >
> > I made a pattern for my first BN7 MK2 off the fenders b/4 the body panels
> > went to the shop because I was afraid they would lose these holes.
> >
> > From leading edge of the fender = 4 1/2" back
> >
> > From fender bead edge = 11/16" out
> >
> > I have never yet had a BN7 come to me w/ the top bow "cups". (How can you
> > lose something that big?) I make my own.
|