Hey Dave,
I used a variable speed "sawzall" to cut out a few of
my inner pivots. It can be done with no scarring to
surrounding metal if you're methodical. I also used
the same tool for the rear leaf spring hangers. IMHO,
it beats the "burning rubber" torch method.
JoeMulqueen
'60 BT7
Torrance, CA
From: HealeyBN7@aol.com
To: healeys@autox.team.net
Sent: Monday, September 06, 2004 5:08 PM
Subject: Fulcrum pins won't budge
Help. The inner fulcrum pins on the lower wishbone
arms on my BN7 will not move. I have, after much
work, managed to remove the split pins and
castle nuts. The fulcrum pins however are not even
beginning to move. Frustration is setting in and
before I go crazy on them and do something really
dumb I thought I'd back away and ask the experts. I
have searched the archives with no real success on
the lower inner fulcrum pins. Thanks for any
advise.
Dave
__________________________________
Check out the new British Cars Forum:
http://www.team.net/the-local/tiki-view_forum.php?forumId=8
|