healeys
[Top] [All Lists]

Re: Healey 1:18 Model available

To: <Editorgary@aol.com>, <healeys@Autox.Team.Net>
Subject: Re: Healey 1:18 Model available
From: "davidwjones" <davidwjones@cox.net>
Date: Wed, 13 Oct 2004 13:33:12 -0400
Thanks Gary!
Those look pretty good!
One small correction, the red/white car is a MK 2, for anyone interested in
MK2's. The other two color schemes are MK1s.

  ----- Original Message -----
  From: Editorgary@aol.com
  To: healeys@autox.team.net
  Sent: Wednesday, October 13, 2004 1:00 PM
  Subject: Healey 1:18 Model available


  This weekend I found a nice model of the Austin-Healey 3000 BN7 in
right-hand
  drive that I wasn't aware was available.
  It is manufactured by (or for) AutoArtDesign in heavy die-cast parts and
  looks similar to some of the earlier 1:18 models, but the detail is better
(e.g.
  60-spoke wheels, tires, engine) and detailing more accurate.
  The one I bought was Healey Blue over Pale Ivory, though their catalog
  indicates that a white with black interior and red/white with black version
is also
  available.
  The only major fault I found with the car was that the interior was pale
  blue, rather than dark blue, though piped in white as original. It also had
a high
  tonneau cover (looked like it was originally made for a BJ8).
  The model itself is open, and has the right structure for the spare tire and
  tonneau shelf, with the tire showing in the trunk area. Lots of neat little
  details in the interior, such as the reinforcement plates where the top bows
  would fit, neat little seat belts, trim screws on the door panels, correct
gauge
  faces, correct shift pattern in white on the black shift knob, black rubber
  floor mats, etc.
  Trunk lid opens on the actual chrome hinges, hood opens, and both doors
open.
  The engine has excellent detailing, including spark plug wires, coil, and
  even a heater return pipe (which is inaccurately shown as polished copper,
but so
  are many in current cars). The carbs are close to accurate, though they are
  not tilted as they should be, and the intake manifold isn't mounted quite
  right.
  But these details don't detract from the overall construction of this model;
  it's the best of that scale that I've seen yet.
  The price where I bought it was $75. The company's website is
  www.autoartmodels.com
  Cheers
  Gary Anderson

Check out the new British Cars Forum:
http://www.team.net/the-local/tiki-view_forum.php?forumId=8




<Prev in Thread] Current Thread [Next in Thread>