Re: Best way to degrease an engine bay

["Bob Spidell" <bspidell@comcast.net>]

Gunk or your favorite brand of engine degreaser (KanoLabs makes a
good one) and warm (if possible) water.  Cover the carbs and electrical
components.

Warning: a pressure washer is tempting, but it'll disintegrate the asbestos
heat shielding on the carb shield and firewall (or so I've heard ;).


bs
********************************************
Bob Spidell         San Jose, CA        bspidell@comcast.net
'67 Austin-Healey 3000             '56 Austin-Healey 100M
********************************************

----- Original Message ----- 
From: "57 Healey" <57healey@gmail.com>
To: "Healey List" <healeys@Autox.Team.Net>
Sent: Monday, December 20, 2004 6:16 PM
Subject: Best way to degrease an engine bay


> What is the best (fastest) way to get very heavy grease off suspension
> the suspension and engine bay.
> 
> -- 
> Patton Dickson - Richmond, TX
> '57 A-H 100-Six - http://Austin-Healeys.com