Jonathan and Carole Quandt wrote:
When you take your parts to the machinist have them magnaflux them
before you order any work done.You might find that something has a crack
and you want to leave your options open.If you have not rebuilt a motor
before you need to find someone who knows about british motors ,they are
not like a Chevy and you should be cautious who you let rebuild them.
Have fun,stay calm and don't forget your wallet. Best regards , Juanito
>
If your strong enough, you might want to try an old mechanic's trick to
check for cracks. Grab the crank by the pulley end and lift it up off
the floor. With a steel hammer, give one of the counterweights a good
rap. If it rings like a bell, it's a good one. If it does not, your
probably going to be disappointed with the magnaflux report.
Mike MacLean
56 BN2
60 AN5
>
>
>
>
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 265.7.1 - Release Date: 1/19/2005
|