what a lead in for that blatant california commercial !!
John Soderling wrote:
>
> I have an excellent wire wheel man here in Walnut Creek, CA and he
> recommends lubing the splines with
> Permatex Anti-Seize Lubricant.
>
> Erika & I just got home this evening from a 220 mile Golden Gate Austin
> Healey Club tour south from Half Moon Bay on the Pacific Coast Highway with
> 16 other Big Healeys. Lunched on the Santa Cruz Warf at Stagnaro's Seafood
> Restaurant. A little high fog as we left Half Moon Bay but after the first
> 15 miles nothing but blue skies and 70 degree weather. Thanks to Roger and
> Marjorie Swales (100M) for putting it together.
> Vrooom vrooom,
> John
> 100-Six Erika the Red
>
> ----- Original Message -----
> From: "Dave & Marlene" <rusd@velocitus.net>
> To: "davidwjones" <davidwjones@cox.net>
> Cc: <healeys@autox.team.net>
> Sent: Saturday, May 14, 2005 5:36 PM
> Subject: Re: Hubs and Splines
>
>
> > Hi DJ,
> >
> > This is probably one of those questions that have a dozen different
> > preferences. I use white Lithium on the splines, inner tapered seating
> > face & outer tapered face that the spinner bears on. About once a year I
> > wipe down the old grease & apply new. If you live in a wet climate I
> > would do it a bit more often. You don't have to worry much about
> > tightening, as they are self tightening. Unless you drive backward a
> > lot, in which case they are self loosening.
> >
> > Dave Russell
> > BN2
> >
> > davidwjones wrote:
> >
> > > Anyway, now, with all new wheels (Dunlop 60 spoke painted) and all
> > > new splines... Other than keeping them tight, is there anything
> > > else to be done to keep the splines and hubs from wearing again?
> > > Also, what if any lubricant do you use on the splines? -I am assuming
> > > no lube of any kind on the spinner thread... I have a little white
> > > lithium on them now.
> > >
> > > Dave J.
>
> Your messages not reaching the list?
|