healeys
[Top] [All Lists]

Re: throttle shaft

To: Warthodson@aol.com
Subject: Re: throttle shaft
From: healeydoc@verizon.net
Date: Sun, 25 Dec 2005 08:07:04 -0800
You dont need to replace the shaft, you would still probably  have one 
with worn out bushings.  We have had the bushing made out of teflon. 
What you will need to do is remove the shaft and then slide all the 
parts off the one end and install the new bushings.


David Nock
British Car Specialists
Stockton Ca
209-948-8767
www.britishcarspecialis.com

On Dec 25, 2005, at 6:14 AM, Warthodson@aol.com wrote:

> I need to replace the throttle shaft for a BJ8 that hangs from two 
> bearings
> on the fire wall above the transmission tunnel. You know, the one you 
> cannot
> see or get to when every thing is installed. It has two levers welded 
> onto it at
> one end. Does anyone have one in good condition that they would sell 
> me?
> Thanks,
> Gary Hodson




<Prev in Thread] Current Thread [Next in Thread>