I took the original covered wood blocks out, saved em for a later day and
replaced with a piece of 1x4 covered in black vinyl.
-----Original Message-----
From: owner-healeys@autox.team.net [mailto:owner-healeys@autox.team.net] On
Behalf Of tom felts
Sent: Tuesday, April 18, 2006 4:44 AM
To: Alan Seigrist Blue 100; grabow.berniel@kendle.com
Cc: healeys@autox.team.net
Subject: Re: Maximum spare tire wheel size
You don't have to completely remove the block---just trim some wood off the
back of it.
tom
> [Original Message]
> From: Alan Seigrist Blue 100 <healey.nut@gmail.com>
> To: <grabow.berniel@kendle.com>
> Cc: <healeys@autox.team.net>
> Date: 4/18/06 2:39:01 AM
> Subject: Re: Maximum spare tire wheel size
>
> 165R15 is the largest (or any old bias ply). the 165R15 is fine... I
> prefer to keep the wood block & rod in as it keeps the wheel from
> flopping around in the boot.
>
> Best Regards,
>
> Alan
>
> '53 BN1 '64 BJ8
>
> On 4/17/06, grabow.berniel@kendle.com <grabow.berniel@kendle.com> wrote:
> > What is the maximum spare tire wheel size that will fit in the boot of a
> > BJ8 and still allow the boot to close and latch properly?
> > Bernie
|