Koni Rear Shock kit drawings

["Steve B. Gerow" <steveg@abrazosdata.com>]

This setup is similar to the one Cape sells, but Cape uses a piece of angle
iron all the way across instead of the single small pieces.

> If you wish to change the  factory rear suspension Jim Hockert (Texas) was
> kind enough to send me information Koni set-up for the 3000, this
> information can be found in the Technical section of my web site
> www.vintage-sportscar-touring.ca
-- 
Steve Gerow
Pasadena CA
59 BN6