Re: Oblong clevis pin holes in pedal box

[John Miller <healeys@n4vu.com>]

Mark and Kathy wrote:
> Three options:
> 1- drill out all the holes oversized and fit larger pin.
> 2- Get a better peddle with a normal size hole
> 3- Weld up the old peddle hole and redrill
    4. Drill the holes oversize and press in bushes. 
       That way, you'll never have to drill the original
       pedal arm again. 

Four...FOUR options (apologies to Monty Python)

-- 
JohnM
It is easier to resist at the beginning than at the end.
                -Leonardo da Vinci