healeys
[Top] [All Lists]

Cylinder Liners

To: <healeys@autox.team.net>
Subject: Cylinder Liners
From: "Greg Lemon" <glemon@neb.rr.com>
Date: Thu, 26 Oct 2006 07:35:04 -0500
I have ordered some of the parts needed for the rebuild of my 100 motor, one
(or four) of the things I ordered was cylinder liners, as the old bores are in
very bad shape, problem is my supplier only came up with 3 of the four and he
and I are both looking for a fourth.

I am sure we will come up with something, not requesting which vendors have
these in stock, rather my question is if I come up with number 4 and it is
from a different manufacturer is that OK, or do I need a matched set, I know
with reciprocating parts such as pistons it is not good to mix and match, are
the liners theoritically OK as long as the bores match?

Thanks,

Greg Lemon




<Prev in Thread] Current Thread [Next in Thread>
  • Cylinder Liners, Greg Lemon <=