W 1 or W 2 on the relay it would not matter which way it was
connected since it is energizing the relay.
If you look at the diagram in the overdrive section on page G 11 it
is the diagram that we used in the Tech article. This is different to
the wiring diagram in the electrical section of the book.
So either way it will work.
David Nock
British Car Specialists
Stockton Ca 95205
209-948-8767
www.britishcarspecialists.com
.
.
On Oct 30, 2006, at 8:52 AM, TERRY COLL wrote:
> The electrical schematic in my Healey workshop manual shows W1 of
> the OD relay
> going to ground. The OD schematic in Norman Nock's Tech Talk book
> page 16
> shows W2 going to ground. Can anyone tell me which is correct?
>
> Terry Coll '64 BJ8
|