Re: wiring

["Alan Seigrist Blue 100" <healey.nut@gmail.com>]

Jim -

Scott's picture shows you that you don't have to drill a new hole to hold
the wiring, just mount harness clip to the relay's bottom screw mount.

Alan


On 1/2/07, healeymanjim@joimail.com <healeymanjim@joimail.com> wrote:
>
> i cannot make out from the pictures in my restoration manual whether the
> wiring harness goes on top or below the signal light relay on the fender.  i
> suspect below but want confirmation before i drill the holes.  healeymanjim.