healeys
[Top] [All Lists]

Re: [Healeys] Fitting lap/sash seat belts.

To: "Quinn, Patrick" <Patrick.Quinn@det.nsw.edu.au>, "Healeys Newsgroup"
Subject: Re: [Healeys] Fitting lap/sash seat belts.
From: "Quinn, Patrick" <Patrick.Quinn@det.nsw.edu.au>
Date: Thu, 4 Oct 2007 12:09:50 +1000
G'day

Many thanks to the many who have taken the trouble to send me
information, photos and copies of BMC documents.

You have been wonderful.

Hoo Roo  and Best Wishes

Patrick Quinn

-----Original Message-----
From: healeys-bounces+patrick.quinn=det.nsw.edu.au@autox.team.net
[mailto:healeys-bounces+patrick.quinn=det.nsw.edu.au@autox.team.net] On
Behalf Of Quinn, Patrick
Sent: Thursday, 4 October 2007 9:43 AM
To: Healeys Newsgroup
Subject: [Healeys] Fitting lap/sash seat belts.

G'day



A friend has just bought a set of 3 point lap/sash seat belts for his
100 and isn't quite sure where the belts should be attached to the car.
Remember it's a RHD car but I wouldn't have thought it should make any
difference.



As far as the attachment near the seat bases perhaps the floor or the
driveshaft tunnel on one side and the floor on the other. With suitable
backing plates of course.



However what about the third attachment for the belt so that it can
easily go over the shoulder? Perhaps the wheel arches would be best?



Your thoughts would be appreciated.



Hoo Roo



Patrick Quinn

Sydney, Australia
**********************************************************************
This message is intended for the addressee named and may contain
privileged information or confidential information or both. If you
are not the intended recipient please delete it and notify the sender.
**********************************************************************
_______________________________________________

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys

<Prev in Thread] Current Thread [Next in Thread>