healeys
[Top] [All Lists]

[Healeys] BILL BOLTON - SCUTTLE BRACING PHOTO

To: <healeys@autox.team.net>
Subject: [Healeys] BILL BOLTON - SCUTTLE BRACING PHOTO
From: "Scott J Graham" <scott@scottjgraham.com>
Date: Wed, 7 Nov 2007 22:25:57 +1100
Bill

 

Can you please forward me the pic referenced below.  My tranny cover is off
and I would like to make this adjustment in the next couple of days.

 

Thanks

 





 

Jon,

 

    I had the pleasure of discussing this phenomenon at  length with Geoff
Healey.

He says that the vibration frequency of the box frame and the interior body
panels are not the same.  They come together for a harmonic frequency at
about 55 MPH.

       Jensen spot welded the interior  body to the frame, thus it is not a
solid structure with the frame.  

    The phenomenon gets worst in the later Healeys as  Jensen increased the
spacing of the spot welds to save costs.

    The solution, that I have found is to weld 1/2" x  1/2" angle iron on
the inside of the transmission opening extending the angle  iron down and
welded 

onto the box frame.    

    This ties the inner body to the frame making it one  vibration entity. 

    I have attached a photo of the installation  outlining the angle iron in
red.

        Bill  Bolton

 


Version: 7.5.503 / Virus Database: 269.15.23/1114 - Release Date: 6/11/2007
8:05 PM
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys

<Prev in Thread] Current Thread [Next in Thread>