Tim,
Go and purchase a 12v Odessey battery (gel type). They have a size similar
to the foot print of the original 6v battery. Their PC925T model is 6
15/32" x6 3/4" x 5 9/16" tall (shorter than the original). The T designation
gives you conventional SAE top post terminals. They are fantastic, clean,
trouble free and you won't need to do any modifications to the tray area to
clear the axle diff. The cold cranking amps is much greater than the car
ever needed, leaving lots of power to spare. They have a 10 year warranty
which speaks for itself. To get to their web site listings go here:
http://www.odysseybatteries.com/battery/pc925t.htm
Rich Chrysler
----- Original Message -----
From: <tld6008@mchsi.com>
To: "Healey list" <healeys@autox.team.net>
Sent: Saturday, December 15, 2007 3:12 AM
Subject: [Healeys] BN7 battery
>I am only left with the horz. supports the batteries or trays used to sit
>on and
> plan to use one 12v unit. What is the best way to secure one battery in
> place? I
> won't be judged at concours.
>
> TIA
>
> --
> Tim Davis BN7
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|