healeys
[Top] [All Lists]

Re: [Healeys] RH fender mounting

To: linwood rose <linwoodrose@mac.com>
Subject: Re: [Healeys] RH fender mounting
From: Alan Schultz <alan@andysnet.net>
Date: Fri, 21 Dec 2007 09:14:11 -0600
Lin,
That may have been me. While assembling my BJ8 five years ago, it became 
apparent that those fasteners were going to be a real pain. I welded a 
short length of steel strap to the bolts and inserted them in the fender 
flange. May have taped them in place (don't recall). Once the fender was 
in place I carefully installed washers and nuts. I did not have to try 
to hold the bolt with a wrench since the strap prevented it from turning 
while tightening the nuts. Worked like a charm and it is completely 
hidden. Would I do it again? Absolutely! There are a multitude of 
knuckle busting, nearly impossible, swear word producing  tasks and this 
was not one of them.
Have fun, ya hear,
Al Schultz
67BJ8
 
linwood rose wrote:
> Sometime in the last five years I recall reading a suggestion to deal  
> with the
> difficulty of accessing that awkward third bolt on the right hand  
> fender. As I
> recall, the person offered that if you place the fender nut on the  
> shroud rather
> than the fender at that location, you can put that bolt in from the  
> fender side
> rather than having to reach around the cooling hose on the engine side.
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys

<Prev in Thread] Current Thread [Next in Thread>