healeys
[Top] [All Lists]

Re: [Healeys] Jag Oil Question--NO HEALEY CONTENT

To: "'Bob Spidell'" <bspidell@comcast.net>, "'healeylist'"
Subject: Re: [Healeys] Jag Oil Question--NO HEALEY CONTENT
From: "Chris Masucci" <csooch1@aol.com>
Date: Sun, 6 Jan 2008 17:04:18 -0600
Hi Bob,

I think the 2.7 quarts are what is needed to take the level from the min on
the dipstick, up to the max line.  I think my XJ6 took about 9.5 quarts, and
the Top Up number was what it took to get from the min to the max lines.

Cheers,
Chris

-----Original Message-----
From: healeys-bounces+chris.masucci=alumni.rutgers.edu@autox.team.net
[mailto:healeys-bounces+chris.masucci=alumni.rutgers.edu@autox.team.net] On
Behalf Of Bob Spidell
Sent: Sunday, January 06, 2008 1:18 PM
To: healeylist
Subject: [Healeys] Jag Oil Question--NO HEALEY CONTENT

   Listers,
   A friend of mine with an XJ12 could use a little help:
   "in  your  wisdom  on British cars, I noticed that the oil capacity on
   the Jag was 10.5 qt,

   but  the  "Top  up  min/max" is 2.7qt. Does this mean you can be 2.7qt
   above or below 10.5 qt?

   The  NAPA  dude  said it took 12 qt. and being trusting, I didn't give
   another thought, put

   12qt  in  and  then noticed I was about a quart high on the dip stick.
   Should I drain a quart

   or is it safe up to 13.2qt?

   It shows this "top up min/max" on the tranny to, but only 3qt.

   Ahhhh, more British specifications..."
   Any help from the pros and/or Jag owners appreciated.
   bs

***************************************************************
Bob Spidell         San Jose, CA        bspidell@comcast.net
'67 Austin-Healey 3000             '56 Austin-Healey 100M
***************************************************************
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys

http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys

http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>