Hi Mike,
The earlier BN1 to car 140204 had a driveshaft 21 1/8" long.
The next one from car 140205 to 221535 was 20 3/4" long.
The last one, for all Hundreds from BN1 car 221536 through end of BN2 was
20" long. These were the cars with the C series rear axle, therefore
slightly longer diff nose.
Rich Chrysler
----- Original Message -----
From: <rrengineer@dslextreme.com>
To: <healeys@autox.team.net>
Sent: Friday, January 18, 2008 8:47 PM
Subject: [Healeys] BN1/BN2 Driveshaft
> What is the difference between a BN1 and a BN2 driveshaft? I would like
> to find out if I have the wrong one for my restoration.
> Mike MacLean
> 56 BN2
> 60 AN5
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as richchrysler@quickclic.net
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|