Eric,
The 12 inch long by 3/8 inch diameter mild steel Shelley/King Dick tommy bar
for the for the BN1 & BN2 is clearly illustrated on page 61 of
"Austin-Healey 100/100-6/3000 Restoration Guide" by Gary Anderson & Roger
Moment. Note that the OEM tommy bar had two 5/8 inch long by 0.050/0.075
deep chisel like indentations 180 degrees apart at approx mid span (6
inches).
Craig Rice
BN1 & BN2
----- Original Message -----
From: "Brits'n'Pieces (Eric Frenken)" <lists@brits-n-pieces.com>
To: <healeys@autox.team.net>
Sent: Tuesday, February 05, 2008 11:41 AM
Subject: [Healeys] Shelley jack handle bar
> Can somebody help me out with usable pictures and measurements to build a
> new handle bar for the Shelley jack of a 100?
>
> Thanks in advance.
>
> Eric
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|