healeys
[Top] [All Lists]

Re: [Healeys] BJ8 firewall rubber plugs

To: Kendall.Freese@Aerojet.com, healeys@autox.team.net
Subject: Re: [Healeys] BJ8 firewall rubber plugs
From: Warthodson@aol.com
Date: Sat, 9 Feb 2008 09:09:56 EST
I read (somewhere) that the red plugs are high temp plugs, as compared to  
the black plugs. I also had a few red ones on my Phase 1 BJ8. However, I am  
not 
sure they used them specifically for their high temp rating. The two plugs I  
recall being red were the large ones behind the rear aluminum door shut  trim 
on my car. There were also a few on the fire wall, but unfortunately I  
didn't note their location when I removed them.
Gary
  
 
 
In a message dated 2/8/2008 9:47:23 A.M. Central Standard Time,  
Kendall.Freese@Aerojet.com writes:

I wonder  why there are both red and black rubber plugs on my BJ8
firewall in the  same size. Is there a code involved here? Did Jensen put
in the red ones  and Abingdon put in the black ones?
Just curious.
By the way, I could  use a serviceable/new black 1 inch rubber plug, my
red one is  reuseable.





**************Biggest Grammy Award surprises of all time on AOL Music.     
(http://music.aol.com/grammys/pictures/never-won-a-grammy?NCID=aolcmp003000000025
48)
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>