healeys
[Top] [All Lists]

Re: [Healeys] Short rubber strap

To: "Mark and Kathy" <mgtrcars@galaxyinternet.net>
Subject: Re: [Healeys] Short rubber strap
From: rrengineer@dslextreme.com
Date: Fri, 4 Apr 2008 18:24:03 -0700 (PDT)
If this is the "John Bull" strap that has the "T" end on it that goes
through the hole, then I believe that Clarke Spares sells a nice repro.  I
use one to locate the choke cable to one of the heater clamps on my
Bugeye.
Mike MacLean
56 BN2
60 AN5

Mark and Kathy
> If you haven't caught this yet.  Our Healey Guru himself was nice enough
> to
> add an
> "actual size" picture of this strap in his Tech Talk manual.   And this
> can
> easily be
> made from an old inner tube that I'm sure we all have one or two in the
> garage.
>
> Page   114,   and it even has a picture of where it goes.
>
> Well done Norm,   Thanks.
>
> Mark
>
>
> ----- Original Message -----
> From: "Charlie Frazer" <cfrazer@jcomm.uoregon.edu>
> To: <healeys@autox.team.net>
> Sent: Friday, April 04, 2008 12:51 AM
> Subject: [Healeys] Short rubber strap
>
>
>> According to the originality guidelines, the 3000 cars had an
>> odd-shaped, 4 rubber strap used to secure the capillary tube to either
>> the heater hose or to the breather hose between the engine block and
>> firewall.
>> The 4 strap is an unusual shape with two holes and a T shaped end.
>> On a 65 BJ8, how should the strap be attached?
>> To which hose?
>> How are the two holes used?
>> One hole must accept the T-shaped end.  Whats the other one for?
>> Thanks for your help.
>> Charlie Frazer
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>