In a message dated 05/04/2008 13:08:27 GMT Standard Time,
healey.nut@gmail.com writes:
Have you replaced your flex lines and flushed the system anytime in
the last few years? I would try that first before trying to figure
anything out. L rear probably just needs adjustment. L front may have
crud or a bad flex line partially blocking fluid flow.
Hi Alan
When I replaced the blocked piston last year I flushed out the fluid and
replaced it. On the Brake Test both the rear brakes have the same ultimate
efficiency when tested individually, but when the test rig measures them
operating
together they do not function together. The same is true of the front brakes
to a lesser degree as far as imbalance is concerned.
It is almost as if the longer pipe runs deliver less hydraulic pressure.
Thanks for your reply
Tim
Tim Ward
Warwick House
12 Mill Road
Kislingbury
Northants. NN7 4BB
Tel: 07855 388 751
_www.SixSigmaWorks.co.uk_ (http://www.sixsigmaworks.co.uk/)
www.TimWardAssociates.com
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|