healeys
[Top] [All Lists]

Re: [Healeys] Starter motor & Pertronix

To: "Mr. Bill" <BN1@pacbell.net>
Subject: Re: [Healeys] Starter motor & Pertronix
From: Dave Russell <rusd@sitestar.net>
Date: Mon, 07 Apr 2008 15:29:27 -0600
There are differences in gear reduction starters. Some have a few 
alternate bolt holes to allow rotating the starter body in relation to 
the mounting nose. Sometimes, non of the options allow mounting without 
creating more footwell clearance.

Others like APT have a whole lot of  alternate mounting holes (9 
positions) to allow small changes of starter body rotation. There was 
only one position that allowed the starter to be mounted without 
clearance problems on my BN2.

It spins my high compression engine very quickly with the 35 AH 
Westco/Miata sealed battery.

Dave Russell

Mr. Bill wrote:

>  Mine was installed by Eric Grunden of Absolutely British so I don't
>  know where it came from. I'm pretty sure it was a direct bolt on
>  with no modifications needed. However, 4-bangers could be different
>  or I might be wrong. Mine has been in the car since 2001 and I love
>  it.
>
>  As Randy said, it spins very quickly, which, I would think, saves the
>  battery. I was working on an ignition problem and finally got Red
>  Car started without having to stick a battery charger on it. Eric
>  wired it through the original starter solenoid so the button on its
>  back can still be used to spin the motor while working under the
>  bonnet. Definitely a plus.
>
>  Bill Barnett '53 BN1 #663 (Getting to be a really cool Driver!)
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>