healeys
[Top] [All Lists]

Re: [Healeys] heat shield board

To: "andy pole" <ampole@hotmail.com>, <healeys@autox.team.net>
Subject: Re: [Healeys] heat shield board
From: "Mark and Kathy" <mgtrcars@galaxyinternet.net>
Date: Wed, 9 Apr 2008 18:27:25 -0400
That would be the one Andy.   The squares would obviously be the back side.
You need to cut it with a carbide hack saw or carbide jig saw and expect to 
go through a couple of blades at least.   Then touch it up
with a file.   Pretty dusty when cutting so do it away from the car,  and 
wear a
dust mask and glasses.  I did mine outside to eliminate a lot of clean up. 
It is cement board so give yourself some fresh air,  on and off.
Also it does break easier than wood when your cutting it so don't beat it up 
too much.

Sure beats the heck our of breathing asbestos.

I also used a spray can " Kills spot cover"  to encapsulate the surface a 
bit and give
it more of an original color and you can touch it up later if you smudge it 
some where.

Some one on the list had the drawings put in a download, did you find them 
in the
archives?

The web page address you sent did not come through right.  If you want to 
send me the sight I will go there and double check the product.

Also if you want to see the finished product I can send you a pic or two.

Mark

----- Original Message ----- 
From: "andy pole" <ampole@hotmail.com>
To: <healeys@autox.team.net>
Sent: Wednesday, April 09, 2008 11:08 AM
Subject: [Healeys] heat shield board


> Hi guys
> I've read the archives and you guys in the US recomend Hardie Backerboard, 
> Ive
> managed to find it in the UK at 1/4" thick x 900 x 1500mm, could someone
> confirm this is the right stuff so I can order some, its around 15 pounds 
> a
> sheet here.
> http://www.jameshardie.com/homeowner/products_backerboard_quarterInch.shtml?o
> penTab=jsnavLink0
> It looks like its smooth but printed with Hardie on one side (I guess you 
> can
> sand it off?) and has an imprinted grid on the other side (guess it will 
> be
> hard to see even at the edges?)
> could someone pls confirm
> thanks Andy
> _________________________________________________________________
> Amazing prizes every hour with Live Search Big Snap
> http://www.bigsnapsearch.com
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as mgtrcars@galaxyinternet.net
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>