healeys
[Top] [All Lists]

[Healeys] Battery Box rivets for the 100

To: <healeys@autox.team.net>
Subject: [Healeys] Battery Box rivets for the 100
From: William Berg <williamsantiks@hotmail.com>
Date: Fri, 11 Apr 2008 09:03:10 -0700
Hey Gang,
 Sometimes I ask David Nock questions which I feel the whole list would
benefit by knowing the answers. The other day I was able to check out a couple
of completed BN1s to help me with some of the finer details so that I could
finish the interior on my BN1 with a BN2 gearbox.
This time I will reask the question as I forgot to write down the info.
A. From the left and right side of front lip of the battery box lid, what is
the distance horizontally to rivets
B.What is the distance between the 2 sets of Rivets in the middle? I believe
it is 11 inches.
C. What is the distance vertically from the rivets  to the studs of the rear
wall?
D. If the straps are placed beneath the vinyl cover before they are riveted in
place, How is the vinyl finished over the strap? Is it folded under and
notched on the sides? It is supplied as a straight edge on the lip sewn to the
armacord.
Thanks -William 54 BN1, 61 BT7

_________________________________________________________________
Get in touch in an instant. Get Windows Live Messenger now.
http://www.windowslive.com/messenger/overview.html?ocid=TXT_TAGLM_WL_Refresh_
getintouch_042008
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>