healeys
[Top] [All Lists]

Re: [Healeys] Leak at windscreen wiper

To: "'Simon Lachlan'" <simon.lachlan@homecall.co.uk>, <healeys@autox.team.net>
Subject: Re: [Healeys] Leak at windscreen wiper
From: "Michael Salter" <msalter@precisionsportscar.com>
Date: Wed, 30 Apr 2008 12:48:17 -0400
Hi Simon,
If you reach up behind the insruments you should be able to grasp the wiper
wheelbox. Giving that a bit of a wiggle may just do the job.

Michael Salter
100 (1953)
AHX12 (1953)
Bugeye (1961)
http://www.netbug.net/blogmichael/
-----Original Message-----
From: healeys-bounces+msalter=precisionsportscar.com@autox.team.net
[mailto:healeys-bounces+msalter=precisionsportscar.com@autox.team.net] On
Behalf Of Simon Lachlan
Sent: April 30, 2008 11:03 AM
To: healeys@autox.team.net
Subject: [Healeys] Leak at windscreen wiper

My Mk II BT7 3000 has a slight drip/leak from the RHS windscreen wiper post.
Nothing much, but it's there and I'd like to fix it.

 

First stage.buy new rubber seals. Then remove the blade assembly, then the
big thin nut, then the rubber o-ring which I put in last time.

Now the part that I can't shift..the chrome thingie through which the drive
spindle protrudes and which keeps the whole thing together and pointing in
the right direction. This would be the thing that actually sits on the
rubber seal.

I cannot shift it to save my life. Yes, a bit of brutality might do it, but
it would probably take out half an acre of paintwork and do in the mechanism
to boot. Or, I could buy a new thingie and aim to somehow cut the old one
off the spindle. But I reckon that would be very hard to do without
devastating the surrounding area. Maybe a Dremel, which I don't have???

Any ideas?

.Thanks,

Simon
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>