Ross,
Sorry for the delayed response. Yes, I received one of those tanks from Jorge
Cervera and it made me want to drink plenty of cervesa. The fix is to order
that adapter nipple from McMaster-Car. It works well however the adapter
causes the fuel line nut to rest right in the middle of the trunk bulkhead
rubber seal so you have to try and modify it to accept the fuel line to keep
the trunk dry. Once you get that done there should be no other midifications
needed anywhere else on the line. I have had mine installed for about a year
now and have put around 3500 miles on it with no problems.
Good luck,
George Haywood
'65 bj8
> Date: Fri, 2 May 2008 13:16:54 -0600
> From: rvmaylor@shaw.ca
> To: healeys@autox.team.net
> Subject: Re: [Healeys] Gas Tank Thread Question
>
> In 2006 there was a thread about the incorrect aftermarket gas tank threads
> and one proposed
> solution by Mr Finespanner was to try the McMaster-Carr adapter. Has anyone
> tried this?
>
> Thanks
> Ross Maylor
>
> 'McMaster-Carr lists an adapter
> that will convert 1/4 NPT to 3/8 BSPP. The Mc-C part number is
> 4936K122, and they go for $6.81.'
_________________________________________________________________
Get Free (PRODUCT) RED Emoticons, Winks and Display Pics.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|