healeys
[Top] [All Lists]

Re: [Healeys] Overdrive Idiot light

To: "'Mark and Kathy'" <mgtrcars@galaxyinternet.net>, <healeys@Autox.Team.Net>
Subject: Re: [Healeys] Overdrive Idiot light
From: "BJ8 Healeys" <sbyers@ec.rr.com>
Date: Sun, 25 May 2008 19:03:23 -0700
Mark, I have had an overdrive indicator light in my BJ8 since the '80s, and
it frequently reminds me to turn off the switch before putting the car in
reverse.  It has also simplified troubleshooting a couple of times when the
overdrive didn't engage when it should have (i.e., no overdrive, no light =
it's not a hydraulic problem, and it's not the solenoid or gear switch).  It
also tells me when the throttle switch is working properly, since it stays
on when the dash switch is turned off until I touch the gas.
Yes, it's true that it is not a positive indication that the overdrive
itself is engaged or not.  For that, you probably need some kind of pressure
switch that operates off of the O/D hydraulics, not the electrics.  Even
then, it wouldn't be fool-proof.
The only time my O/D has failed to disengage was apparently a mechanical or
hydraulic problem due to bad (Wal-Mart Accel 30W non-detergent) oil, last
summer, fixed merely by a change to Redline MTF90.  Any warning light wired
into the overdrive electrical or hydraulic system would not have picked that
up.

I have the light wired in parallel with the dash switch (photo attached for
Mark).

Steve Byers
HBJ8L/36666
BJ8 Registry
Havelock, NC  USA

-----Original Message-----
From: healeys-bounces+sbyers=ec.rr.com@autox.team.net
[mailto:healeys-bounces+sbyers=ec.rr.com@autox.team.net] On Behalf Of Mark
and Kathy
Sent: Sunday, May 25, 2008 4:52 PM
To: healeys@Autox.Team.Net
Subject: [Healeys] Overdrive Idiot light

I would like to install an overdrive light indicator to remind me that my
overdrive is still on.   Especially at night,  how can any one tell on a
Healey unless you reach out and feel the switch.   Seems to me that an idiot
light could solve a few expensive problems.

A question for the Healeyperts on the list .   Which switch would be the
most
effective to patch the light into to let me know that something is still on.
The OD  on/off switch would only tell me that switch is still ON, but if
there
was a malfunction else where I would want to have that information also.

Maybe the Lock Out switch would be a better area to light up.  Which switch
failure causes the most damage?

Mark
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys

You are subscribed as sbyers@ec.rr.com

http://www.team.net/archive

[demime 1.01d removed an attachment of type image/jpeg which had a name of 
cigar lighter 002.jpg]
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>