healeys
[Top] [All Lists]

Re: [Healeys] Fwd: [Spridgets] Big Healey long shot.

To: "Healey List" <Healeys@autox.team.net>, mikey@b2systems.com
Subject: Re: [Healeys] Fwd: [Spridgets] Big Healey long shot.
From: "Alan Seigrist" <healey.nut@gmail.com>
Date: Thu, 10 Jul 2008 14:25:04 +0800
Mike -

The brake master cylinders used on British cars in the early 50s can
all look quite similar but in fact can vary quite a bit.  For example
the MC used on my '52 Atlantic looks similar to the MC on my '53 AH
100 but in fact they are totally different - the stop lamp switch on
the Atlantic screws into the back of the MC whereas on the 100 it is
located remotely.  This is significant because mechanically the two
cars are identical otherwise.

My suggestion to you is to have the original MC professionally sleaved
(with SS) and rebuilt by a rebuilder.  That way you'll never worry
about mixing and matching incorrect components - which is a bad idea
when it comes to your brakes.

Incidentally, one of only 4 Singer Rapier Convertibles ever made by
the factory is undergoing complete restoration here in Hong Kong.

Best,

Alan




On 7/10/08, Mike Vasquez <mike.vasquez@gmail.com> wrote:
> Anyone able to help Mike out?
>
>
> ---------- Forwarded message ----------
> From: Mike Rambour <mikey@b2systems.com>
> Date: Wed, Jul 9, 2008 at 1:55 PM
> Subject: [Spridgets] Big Healey long shot.
> To: Spridgeteers <spridgets@autox.team.net>
>
>
>  Does anyone have a 100-4 brake master cylinder that they could take
> some measurements for me ? or better yet close by so I can compare ?
>
>  I know there is a big healey list but I am on too many lists already so
> thought I would ask here before joining another list.
>
>  One of our members needs a master cylinder for his Singer and the 100-4
> cylinder looks identical but there is some discussion if the piston size
> is the same.  I am talking about part 7-076 on this page
> http://www.victoriabritish.com/Features/AH/AHBR1.htm.
>
>  I have seen the 2 together and I know the bolt holes are easily with a
> 1/4" of each other, I could not compare that closely but its close, its
> just the internal diameter that is the concern.
>
>    mike
> You are subscribed as mike.vasquez@gmail.com
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as healey.nut@gmail.com
>
> http://www.team.net/archive
>

-- 
Sent from Gmail for mobile | mobile.google.com

Alan

'52 A90
'53 BN1
'64 BJ8
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>