I went by the Toyota dealer and found out that there are 4 different throw out
bearing arms made for the Supra engine depending on the year. I did not have
any problems with the last conversion which used an 88 Supra tyranny. This
conversion uses an 84 tyranny which has the arm which is too short. I had the
dealer look up the part in Smitty's instruction book and since they had it in
stock, I took a measurement. It was the right one. Problem solved.
Jerry
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|