All they can and should be able to do is to adjust the toe-in. That greatly
effects the appearance of the appearance of the camber of the wheels. If
you're running radial tires, toe-in should be pretty much plus or minus
zero. Bias ply tires should toe in approx. 1/16" to 1/8".
Rich Chrysler
----- Original Message -----
From: <philritten@aol.com>
To: <healeys@autox.team.net>
Sent: Sunday, July 13, 2008 2:16 PM
Subject: [Healeys] Front End Alignment
> The left front wheel of my 100-6 is tipped a little inwards at the top. At
> the conclave I was told that I need to get the front end aligned and make
> sure that the person who does it is able to adjust it differently than
> newer cars. I can't remember what it was that I'm supposed to be asking
> for. Can anyone help me here? I want to take it in this week for an
> alignment,.
>
> Thanks
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as richchrysler@quickclic.net
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|