You should be able to get a spark plug socket on there and then put on a
socket extension which will help you clear the hose, then put the socket
wrench on the extension. This is the way I've always done it, much easier
than undoing a hose and getting water everywhere.
On Mon, Jul 14, 2008 at 12:34 PM, <firstname.lastname@example.org> wrote:
> I removed five of six plugs, but the tube going to the heater control valve
> is in the way of the 6th plug. If I remove this hose, or unscrew the valve
> from the block is water going to come rushing out?
Support Team.Net http://www.team.net/donate.html