Hello, John:
I would use "0000" ("four ought") steel wool to polish out the glass.
Try it out on a small unobtrusive spot first - and make darn sure it is 0000
and not the 000 or rougher steel wool else you will really have a problem!!
Al Fuller
Fuller Compliance, LLC
Quality Systems Consulting
Software Quality, Validation + 21 CFR Part 11
714.335.0248
www.fullercompliance.com
-----Original Message-----
From: healeys-bounces+al=bighealey.org@autox.team.net
[mailto:healeys-bounces+al=bighealey.org@autox.team.net] On Behalf Of John
Snyder
Sent: Thursday, July 31, 2008 12:29 PM
To: healeys@autox.team.net
Subject: [Healeys] Windsield Scratches
Does anyone out there know of a good way to remove/polish out small
scratches
in a windshield. I'm in the final stages of a ground up restoration of a
1959
BN7, and there are some small scratches in the inside (rear) of its original
windshield. TIA
John Snyder
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|