healeys
[Top] [All Lists]

Re: [Healeys] Intake Nuts

To: "Bob Spidell" <bspidell@comcast.net>
Subject: Re: [Healeys] Intake Nuts
From: "Alan Seigrist" <healey.nut@gmail.com>
Date: Mon, 25 Aug 2008 09:14:41 +0800
Bob -

In my experience good old fashioned brass nuts in this area are still the
best option.  If you are worried about them coming off, use a SS
lockwasher.  The only thing is each time you remove them, replace them with
new nuts.

I've had brass nuts here, used with anti-seize, for over 40 K miles and have
not touched them, they stay nice and tight.

Alan

'52 A90
'53 BN1
'64 BJ8


On Mon, Aug 25, 2008 at 6:34 AM, Bob Spidell <bspidell@comcast.net> wrote:

> Anybody tried these on the exhaust manifold to downpipe flange studs?
>
>
> bs
>
> John Sims wrote:
> > It is found at:
> >
> > https://www.pegasusautoracing.com/productselection.asp?Product=MS21042
> >
> > believe that you want the 5/26 24 locknut
> >
> > This is listed on my site.
> >
> > John Sims, BN6
> > Aberdeen, NJ
> >
> > www.healey6.com
> >
> >
> >
>
>
> --
> *******************************************************************
> Bob Spidell           San Jose, CA            bspidell@comcast.net
> *******************************************************************
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as healey.nut@gmail.com
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>