Hi Bob, please see the following link. This explains the process using the
Sealey tool GA45.
http://www.ccw-tools.com/uploads/images_products/PDF/Instructions/GA45.pdf
Kindest Regards
Tom
Tom McCay Director Classic-Car-World Ltd 32 Washingborough Road
Heighington Lincoln LN4 1RE 01522 888178 (Tel) 0870 705 9115 (fax)
enquiries@ccw-tools.com www.ccw-tools.com
Registered address: 32 Washingborough Road Heighington Lincoln LN4 1RE.
Classic-Car-World Limited is a company registered in England and Wales with
company number 3930761. VAT registration number: 755 7630 05
----- Original Message -----
From: "Bob Spidell" <bspidell@comcast.net>
To: <healeys@autox.team.net>
Sent: Sunday, August 31, 2008 5:00 AM
Subject: [Healeys] Checking castor angle
> Listers,
>
> A while back someone posted a method for checking castor angle by
> measuring camber at several angles of turn-in and -out. Would that
> lister--or anyone else that knows the secret method--mind re-posting the
> instructions?
>
> TIA,
> bs
>
> --
> ***************************************************************
> Bob Spidell San Jose, CA bspidell@comcast.net
> '67 Austin-Healey 3000 '56 Austin-Healey 100M
> ***************************************************************
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as enquiries@classic-car-world.co.uk
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|