I got it off by taking the top cover off, gave me a lot of extra clearance that
way also. Didn't see the bolts you reffered to mine has 2 roll pins that I found
out need to be driven into the grooves in the shift lever ball, I think.
--
Tim Davis BN7
---------------------- Original Message: ---------------------
From: "Randy Dickson" <rdickson@midwestarchaeology.com>
To: <tld6008@mchsi.com>, "'Healey list'" <healeys@autox.team.net>
Subject: RE: [Healeys] Center shift trans selector
Date: Mon, 22 Sep 2008 19:35:13 +0000
> Tim,
> Did you undo the two 7/16 bolts that hold the lever in? They fit into the
> vertical grooves in the ball of the shifter. They are at 3 and 9 o'clock if
> you are looking straight down on the gearbox.
>
>
> Randy
> Healey Archaeologist
> 63 BJ7
> 60 BT7
> 66 Cobra replica
> 06 Mini Cooper S
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|