Thanks Rich.
As my chassis number is 112 that's probably why I don't have one.
regards
John
----- Original Message -----
From: "Rich C" <richchrysler@quickclic.net>
To: "John Rowe" <jarowe@westnet.com.au>
Cc: "Healey List" <healeys@autox.team.net>
Sent: Thursday, October 09, 2008 12:48 AM
Subject: Re: [Healeys] Jack Hold Down Strap
> Hi John,
>
> I will quote from the National Concours Originality Guide, 2008 edition,
> page 208.....
>
> "Jack Securing Strap Austin part Number AAA2064 or AAA4258 or AAA5217. A
> strap of black cotton "duck" webbing, 16 1/2" long and 1" wide was added
> to
> the tool kit at chassis number 11280 (BN7) and 11585 (BT7). It is used to
> secure the jack to the left hand bumper bracket inside the boot. The
> buckle
> is painted black and has "ROKO" (with the " marks) stamped into it."
>
> Hope this helps,
>
> Rich Chrysler
>
> ----- Original Message -----
> From: "John Rowe" <jarowe@westnet.com.au>
> To: "Rich C" <richchrysler@quickclic.net>
> Cc: "Healey List" <healeys@autox.team.net>
> Sent: Tuesday, October 07, 2008 10:46 AM
> Subject: Re: [Healeys] Jack Hold Down Strap
>
>
>> Hi Rich
>>
>> Could you advise us not so knowledgeable where the jack and strap are
>> located. I can't find anything in my parts book for my BT7.
>>
>> Regards
>> from west oz
>>
>>
>> John Rowe
>> Perth
>> March 1959 BT7
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|