healeys
[Top] [All Lists]

Re: [Healeys] BN1 fron wheel bearings

To: "Peter Linn" <greylinn@ozemail.com.au>
Subject: Re: [Healeys] BN1 fron wheel bearings
From: "Alan Seigrist" <healey.nut@gmail.com>
Date: Wed, 19 Nov 2008 08:57:15 +0800
Peter -

Do not,* I repeat*, DO NOT use these bearings.  They are unsafe.  You must
use proper thrust ball bearings for the BN1.  You can get them from British
Car Specialists in Stockton, California.  www.britishcarspecialitsts.com.

Let me check around, I think there is a proper UK supplier for these as
well.

Alan

'52 A90
'53 BN1
'64 BJ8


On Wed, Nov 19, 2008 at 8:46 AM, Peter Linn <greylinn@ozemail.com.au> wrote:

> G'day list. I've just been supplied by a local "specialist" with inner
> front
> wheel bearings for my "new" BN1. These bearings are labelled "TR6 front O/D
> (sleeve)" and are County Brand, made in India (itself a worry!) The bearing
> although of the same dimensions as the old ones are not thrust type
> bearings,
> ie with a lip on one side and marked "thrust", to be installed with this
> face
> to the spacer presumably to carry the pre-load. The bearing supplied are
> umarked and are the same both sides. Any comments?
>
> Cheers
>
> Peter Linn
> Brisbane
> BN1 Ward Spl
> BN1 Holden V6
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as healey.nut@gmail.com
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>