healeys
[Top] [All Lists]

[Healeys] wire harness fasteners

To: <Healeys@autox.team.net>
Subject: [Healeys] wire harness fasteners
From: "mailmaineguide.com" <info@atteanlodge.com>
Date: Sun, 7 Dec 2008 13:41:03 -0500
Hello List, I am routing the rear wiring harness along the inside of the left
frame member as instructed, however the holes drilled into the frame to hold
the "P" clips are about 5/16" in diameter which seems way to large to hold a
standard screw, is there an insert of some kind that goes into the hole first?
I can find no reference to any in the parts or service manuals. Thanks again.

Brad Holden
67 BJ8
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>