The spigots on my '59 BN7 face inboard. As best I can determine, this
is the original, unmolested installation.
Doug
----- Original Message -----
Jerry,
Look closely at the spiggot ends. They should have screwdriver slots in the
ends. You can carefully rotate these ends to aim the stream as needed. BTW,
the spiggots face outboard, not inboard.
Rich Chrysler
**************From Wall Street to Main Street and everywhere in between, stay
up-to-date with the latest news. (http://aol.com?ncid=emlcntaolcom00000023)
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|