healeys
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [Healeys] Engine Head

from [john spaur] [Permanent Link][Original]
To: healeys@autox.team.net
Subject: Re: [Healeys] Engine Head
From: john spaur <jmsdarch@sbcglobal.net>
Date: Wed, 04 Feb 2009 22:56:41 -0800 
On the MKII 3000 engine the valve cover bolts are the lifting points, 
I would suspect it would be the same for the 100/4.

John

At 08:35 PM 2/4/2009 +0100, Oudesluys wrote:
>henry schreef:
>>Hello List:
>>
>>I am getting ready to remove my 100/4 engine. With all the talk of  ....
>>What about using the 2 valve cover bolts?
>>
>>Thanks
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: [Healeys] (no subject), Rich C
Next by Date:  Re: [Healeys] electrc fan vs. belt drive, Oudesluys
Previous by Thread:  Re: [Healeys] Engine Head, Oudesluys
Next by Thread:  [Healeys] Item on ebay, Mark Goodman
Indexes:  [Date] [Thread] [Top] [All Lists]