healeys
[Top] [All Lists]

Re: [Healeys] Dash mount studs or bolts BJ8

To: Weston Keyes <westonkeyes@hotmail.com>
Subject: Re: [Healeys] Dash mount studs or bolts BJ8
From: Alan Seigrist <healey.nut@gmail.com>
Date: Fri, 27 Feb 2009 23:05:15 +0800
Wes -

The bolt goes through the bracket, through the A pillar and through the
windshield mount and fixed with a nut.  Actually I think the nut is fixed on
the inside... there is no captive or welded nut here.

Alan

'52 A90
'53 BN1
'64 BJ8


On Fri, Feb 27, 2009 at 9:18 PM, Weston Keyes <westonkeyes@hotmail.com>wrote:

> Hello Folks,
>
>     I am restoring a car I didn't take apart. There was body work done
> around
> where the dash ends mount to the body and also the windshield is attached.
> There are 2 cast aluminum brackets that are screwed into the dash and
> attach
> to the body. Was there originally a stud welded to the body that goes
> through
> the hole in the casting? I just have a hole now. If they used a bolt the
> head
> would be covered up by the mounting plate of the windshield. Any clues?
>
>   Thanks for your patience.
>
> Wes Keyes
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as healey.nut@gmail.com
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>