healeys
[Top] [All Lists]

Re: [Healeys] Muffler Heat Shield

To: healeys@autox.team.net, stevesylvia2 <stevesylvia2@comcast.net>
Subject: Re: [Healeys] Muffler Heat Shield
From: "J. Scott Morris" <jstmorris@yahoo.com>
Date: Sun, 1 Mar 2009 18:01:24 -0800 (PST)
Hello Steve;  Here are some dimensions and patterns that may help you to make
your own heat shields.  Good Luck!
--Scott Morris; Simcoe, Ontario, Canada; '60 MkI BN7 & '62 MkII BT7
J. Scott Morris - Keep Smiling,  Murphy Lives

--- On Fri, 2/27/09, stevesylvia2 <stevesylvia2@comcast.net> wrote: << Hi
All,   I'm in the assembly process with my BN7 and was wondering if a heat
shield was installed under the drivers seat floor pan from the factory. When I
look for heat shields, all I ever find is heat shields for the engine bay. 
Before I had the frame stripped and re-painted, I didn't notice any studs, or
weld marks to suspend a heat shield for the muffler.  Does anyone know if
there is a solution for installing a heat shield under the drivers floor pan
or where I can find one?  I live in Tucson Arizona and its hot enough here
without a muffler adding to it.
Thanks for any assistance,  Steve Meyer '61 BN7 >>



      __________________________________________________________________
Ask a question on any topic and get answers from real people. Go to Yahoo!
Answers and share what you know at http://ca.answers.yahoo.com

[demime 1.01d removed an attachment of type application/pdf which had a name of 
Dimensions]
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>
  • Re: [Healeys] Muffler Heat Shield, J. Scott Morris <=