Speak to your painter or if you're attempting this work yourself, your paint
supplier. You want something that will not dry, shrink, crack or eventually
fall out, and it must take the type of paint you're going to use.
Rich Chrysler
----- Original Message -----
From: "Bob Spidell" <bspidell@comcast.net>
To: "healeylist" <healeys@autox.team.net>
Sent: Tuesday, March 17, 2009 10:18 PM
Subject: [Healeys] What's the best seam sealer ...
> ... for a BN2?
>
> TIA,
> bs
>
> --
> *******************************************************************
> Bob Spidell San Jose, CA bspidell@comcast.net
>
> "Not everything that can be counted counts, and not everything that counts
> can be counted." -- Albert Einstein
> *******************************************************************
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as richchrysler@quickclic.net
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|