healeys
[Top] [All Lists]

Re: [Healeys] 100 Generator Markings

To: "rrengineer @dslextreme.com" <rrengineer@dslextreme.com>
Subject: Re: [Healeys] 100 Generator Markings
From: Roland Wilhelmy <rwil@sbcglobal.net>
Date: Mon, 23 Mar 2009 15:47:40 -0700
Best I can recall, I don't think the markings on the generator will be
of much help but the factory manual -- which you need if you don't
have a copy -- gives the maximum output as 22 amperes at 13.5 volts.

The batteries had amp/hr ratings of 50 amp/hrs at a 10-hour rate.  The
generator/dynamo just has an amp rating.  Probably your modern
batteries have higher ratings.

Your generator markings will give you the month and year of
manufacture.  A solid state regulator is nice but standard
electromechanical regulators have provided good service for years at a
time for many people.

You didn't ask for my opinion but here it is:-)   if you are going for
Concours, just use the stock regulator with clean contacts.  If you
are going for drivability beyond stock, I'd get an alternator with
built-in regulator and use the stock regulator as a terminal block.
That way you can have 40 or    60 amps or more for all the lights and
whatevers that you could desire.  22 amps isn't a lot of output to
work with for anything beyond the stock setup.

-Roland

On Mon, 23 Mar 2009 11:43:22 -0700, you wrote:

::Can someone tell me what the markings are on a 100-4 generator for my 56
::BN2?  I need the specs related to amp/hrs etc.  I am having a voltage
::regulator gutted and replacing the innards with solid state electronics.
::The gentleman doing the conversion needs the info stamped on the generator
::case to do a proper job on cutout voltages and currents I suppose.  I don't
::have a generator or core for my restoration yet.
::Mike MacLean
::56 BN2
::60 AN5
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>