Hello Folks,
I am wiring up a Tach that I didn't disassemble. I see a male spade
connection on the back of the case and on the opposite side of the tach I see
a brass machine screw. Both connect to electrical components inside the tach.
>From the wiring diagram it looks like one white wire goes to the coil and the
other to the ignition switch. Which wire goes to which terminal?
Many thanks
Wes Keyes
York, Maine
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|